[Tech-Assist] Harris SX5A logic problem

[Bill Boyd]

STEVE,
 
check the resistors that are on the right side of the transmitter across the caps on the output of the PWM boards.
i had the problem you're talking about on the meter, it would also comeback to "0" when i opened the front door or the back door.
 
bill
 
In a message dated 7/19/2011 11:44:12 P.M. Eastern Daylight Time, radioranger at comcast.net writes:
>the odd thing is that the PA current meter is reading downscale
>whenever you try to turn the rig on, and that meter stays pinned downscale
>until I turn off the control power breaker.  In desperation I finally