[Tech-Assist] Continental 802B question

[It's Dave]

Depends on the reference oscillator calibration.

(Ducking)


----- Original Message -----
From: "Tom Taggart" <tpt at eurekanet.com>
To: <tech-assist at radiolists.net>
Sent: Saturday, June 09, 2007 10:20 AM
Subject: [Tech-Assist] Continental 802B question


> The long distance call came to me last night: how to set frequency on an
802B? (Why, of course they don't have a manual!)
>
> The station operates on 104.1
>
> I have an 802A manual, assuming the 802B is the same; it looks to me
like the switches should be set as follows:         (Where "1" = "off")
>
> 10 MHZ          1 mhz        100 khz         10 khz
>
> 1010            0100         0001           All On-0000
>
> How far off am I?
> ---
> CoreComm Webmail
> http://www.core.com
>
> _______________________________________________
>
> The Tech Assist [TA] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>



-- 
http://www.uptonshop.com/

Checked by AVG Free Edition. 
Version: 7.5.472 / Virus Database: 269.8.13/842 - Release Date: 6/9/07 10:46 AM