[Tech-Assist] Marti CR-10 audio board question-UPDATE

[Gary Glaenzer]

got a new board from BE, needed a road trip anyway (65 miles)  ( $ 170 in 
case you wondered)

anyone have a spare DFM-1D-1 module they would like to get rid of ?

working or non-working, I can repair it if need be

the matching RPT is 2-freq, but has only one oscillator module in it

Thanks

Gary

----- Original Message ----- 
From: "Gary Glaenzer" <glaenzer at frontier.com>

> have a 800-228 board here with melted-down audio output chip/socket   LM
> 1877N-9 (where the h*ll did they find THAT thing ??)
>
> anyway, have an old 210 MHZ foreign-use CR-10 (215 MHz) with identical 
> part
> #'d board, put it in and it works
>
> BUT..........................the original has a sticker that says '10,500 
> HZ
> on it and the one out of the foreign unit doesn't have a sticker like that
>
> the manual shows SIX versions of that pup
>
> 3 k
> 5 k
> 8 k
> 10.5 k
> 12.5 k
> 15 k
>
> looks like I've got a 3 k board in there........not good; R-6 is 68 K like
> the manual says for a 3 k board
>
> anyone ever try to change these over in the field ?
>
> G
>