[Tech-Assist] Schematic needed, Gates/Harris Executive Console

[C. Park Seward]

And if that doesn't work, I have the fold-out for the Diplomat.

Too bad Bob doesn't make those retros any more. They were great.  But  
I was able to restore the boards in the original.

The most of the germanium trannys are still available. The original  
power supply was a problem, not such a great design so we made a  
replacement that fit inside the PS box and kept the look.

C. Park Seward



On Jun 13, 2007, at 6:47 PM, Bob Tarsio wrote:

> Ray:
>
> I can probably help you with this. I have an original manual for these
> consoles. We used to build retrofit electronics for these units.  
> Send me an
> address and I can run off a copy for you.
>
> Bob Tarsio
> President
>
> Broadcast Devices, Inc.
> 5 Crestview Avenue
> Cortlandt Manor, NY 10567
>
> www.Broadcast-Devices.com
>
>
> Tel. (914) 737-5032
> Fax (914) 736-6916
>
>
>
> -----Original Message-----
> From: Ray Tadry
>
> I've recently acquired a 1977 Harris Exec Console. I have the  
> manual but
> it's missing the fold out console schematic 852-5854-001. If anyone  
> has one
> and is willing to send it to me, I'll copy it and return it and  
> reimburse
> for postage. Or if you're willing to copy it I'll reimburse for  
> that and of
> course postage. I'd also be interested in any semiconductors you  
> might have
> for this console. Please contact me off list. Thank you.
>
> Ray Tadry
> Sterling Audio